How To Use Gen Tek Airpods

Beside the above, how do Gen Tek earbuds work? Place both earbuds in your ears. Press the power button on the back of each earbud at the same time until you hear “channel left, channel right”. You might have to press the power button on the earbuds a number of times.


Moreover, how long does it take for Gen Tek Airpods to charge? They work great. The battery life is about 7 hours and it takes about 2 to 3 hours to charge.

In this regard, how do you use TWS headphones?

  1. Make sure that your phone has the Bluetooth turned on. Your phone and earbuds should be within 3ft (1m) of each other.
  2. Turn your earbuds on and search for new devices in your phones Bluetooth settings.
  3. You’re connected and ready to listen to music!

How do you get both wireless earbuds to work?

  1. Try another pair of earphones. The first step is to get a pair of perfectly working earphones and connect them to your device.
  2. Restart the device. Another simple fix you may want to try is restarting your device.
  3. Check the settings.
  4. Clean the headphone jack.

How do I connect earbuds to my phone?

How do you reset tw2 wireless earbuds?

  1. Use the USB cable to connect the charging case to a power source.
  2. Insert the earbuds into the charging case and, within 60 seconds, touch and hold the right and the left touch control panel for 6 seconds simultaneously.
  3. This will restart your earbuds.

How do you pair earbuds?

  1. First Open Settings.
  2. Next, tap Connections.
  3. Then tap Bluetooth.
  4. Then tap Scan at the top-right corner of your screen.
  5. Next, press and hold the power button on your headphones.
  6. Finally, find your headphones and tap them.

How do you turn on Gen Tek wireless earbuds?

How do I stop my AirPods flashing blue?

  1. Put the headphones in pairing mode. The status lights will flash red and blue.
  2. Press the volume down button.
  3. Turn off the headphones.
  4. Turn them on again.
  5. Connect your headphones with your device.

Can you overcharge a Bluetooth headset?

Overcharging your wireless earbuds won’t affect the device in any way. There was a time when the majority of all electronic device batteries were nickel-based, and the lifespan of these batteries was reduced due to overcharging. Since most batteries are now lithium-ion, overcharging does not affect them.

How do you activate TWS earbuds?

Step 1: Take out one side of i7s TWS earphone from charging case. Step 2: Press and hold the multifunctional button until the LED light flash red and blue alternately. Step 3: Turn on the Bluetooth on your first mobile phone. Step 4: Select “TWS-i7s”in the Bluetooth list.

How do you control TWS earbuds?

Music control: Double click the touch area for next track, single click for pause /play. click for pause /play. Answer phone calls: Single click the touch area for answering, and click on the phone for hanging up. Call-reject: Long touch either of the earphone for 2 seconds.

How do you turn on TWS earbuds?

Press and hold the power/pairing button on each earphone for up to 2-3 seconds to turn them on. You will hear a voice prompt with “Power On”.

Why are my TWS won’t pair?

Why Are My Tws Won’t Pair? In Step 1, you will need to delete the left and right earbuds pairing information (Reset the i12 TWS). When the device is in pairing mode, 5 clicks on the power button will turn the LED red. The second step is to turn on the i12 TWS by long pressing the function key for five seconds.

How do I connect my TWS earbuds to my Iphone?

What is TWS pairing mode?

It’s called True Wireless Stereo (TWS), and it’s a unique Bluetooth feature that will let you enjoy true stereo sound quality without the use of cables or wires. TWS works as follows: You pair a primary Bluetooth speaker to your preferred Bluetooth-enabled audio source.

Why can I only hear out of one AirPod?

If there’s low volume in one AirPod Check the microphone and speaker mesh on each AirPod. If you see any debris, clean your AirPods using the guidelines in this article, and see if that fixes the issue. Go to Settings > Accessibility > Audio/Visual > Balance, and make sure that the balance is set in the middle.

Why my earbuds are not working together?

Step 1: While the headphones are charging (the white LED indicator of earbuds is on), double-press the power keys of both sides to reset the headphones. Remove both the headphones from charging case, then both headphones power on automatically and connect each other within 60 seconds.

How do I connect both AirPods at the same time?

  1. Ensure that your headphones are connected first. Once connected, tap the AirPlay Audio button in your Control Center. Accessing the Control Center. (
  2. Then, tap Share Audio. Select the second pair of headphones you want to connect to and select Share Audio again.

Why is my Bluetooth not pairing?

For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.

Why won’t my TWS earbuds turn on?

If your Bluetooth headphones won’t turn on, it’s probably not broken. You simply need to reset it. In fact, you can solve many problems with a Bluetooth headset with a quick factory reset, such as: If your Bluetooth headset won’t connect with your smartphone or laptop.

How do I reset my TWS Airpods?

Press and hold the power button for about 5 seconds until the LED flashes PINK. The earbuds will turn off and the next time you power them on, they will automatically enter pairing mode (LED alternates between flashing RED & BLUE.) You are now free to pair the earbuds with any device!

How do I know AirPods is charging?

Open your AirPods case, leaving your AirPods inside, and hold the open case near your unlocked iPhone. The battery levels of both your AirPods and their charging case will appear on screen. Notice the little black lightning bolt next to the battery icon. This indicates active charging.

Why are my AirPods red?

Red means the battery needs to be charged. Green means the battery is full and ready to go. The LED is capable of transitioning between these three colors, which will remain either solid or blink to indicate their status.

How do I know when my AirPods are charged?

If your AirPods are in your case and the lid is open, then the light shows the charge status of your AirPods. When your AirPods aren’t in your case, the light shows the status of your case. Green means fully charged, and amber means less than one full charge remains.

Should you charge AirPods every night?

Is it safe to keep AirPods charging overnight? The short answer is yes, it’s safe. Your AirPods can’t overcharge and doing so overnight won’t damage their battery.

How can you tell if your earbuds are charged?

The charging case will flash red whilst plugged in and charging your earbuds. Once fully charged the light will stop flashing and stay solid red.

Should I keep earbuds in case?

The battery will naturally degrade over time which is completely fine; however, by charging it every before it hits under 20% charge, you greatly increase the lifespan of your wireless earbuds’ battery. So leaving your wireless earbuds in the case when not in use is actually far better for your earbuds battery health.

Back to top button

Adblock detectado

Por favor, desactive su bloqueador de anuncios para poder ver el contenido de la página. Para un sitio independiente con contenido gratuito, es literalmente una cuestión de vida o muerte tener anuncios. Gracias por su comprensión.